Mass Transfer Tutorial

lordluan · July 30, 2019, 20:37

Are there any tutorial with mass transfer using ANSYS CFX? I've looked it up, but I couldn't found any.

Thanks in advance

ghorrocks · July 30, 2019, 21:09

Fluid flow is mass transfer. They all have fluid flow.

Or are you talking about mass fractions and species diffusion?

lordluan · July 30, 2019, 21:59

Quote:

Originally Posted by ghorrocks

Fluid flow is mass transfer. They all have fluid flow.

Or are you talking about mass fractions and species diffusion?

You are right. I meant mass fractions and species diffusion.

ghorrocks · July 31, 2019, 19:08

Have you looked at the tutorials? I would have thought a few minutes reading the documentation could have answered this question.

Anyway:
* Flow from a circular vent
* Reacting flow in a mixing tube
* Combustion and radiation in a can combustor
* Spray dryer
* Coal combustion
* Steam jet

And there are more tutorials on the ANSYS Customer webpage and even more if you ask ANSYS support.

July 30, 2019, 20:37	Mass Transfer Tutorial	#1
lordluan Member Lucas Join Date: May 2019 Posts: 41 Rep Power: 7	Are there any tutorial with mass transfer using ANSYS CFX? I've looked it up, but I couldn't found any. Thanks in advance

July 30, 2019, 21:09		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,934 Rep Power: 145	Fluid flow is mass transfer. They all have fluid flow. Or are you talking about mass fractions and species diffusion? __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

July 31, 2019, 19:08		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,934 Rep Power: 145	Have you looked at the tutorials? I would have thought a few minutes reading the documentation could have answered this question. Anyway: * Flow from a circular vent * Reacting flow in a mixing tube * Combustion and radiation in a can combustor * Spray dryer * Coal combustion * Steam jet And there are more tutorials on the ANSYS Customer webpage and even more if you ask ANSYS support. __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
liquidEvaporation in simpleReactingFoam	neilk	OpenFOAM Programming & Development	0	May 16, 2019 19:37
Using Fluent VOF and Lee model to simulate mass transfer of two phase	Albert Lee	FLUENT	1	May 2, 2019 08:01
Eulerian Multiphase Interfacial Species Mass Transfer	thomasduffy001_	Fluent Multiphase	1	October 3, 2017 07:21
How to calculate Volumetric Mass transfer coefficient using CFX?	tuks_123	CFX	2	July 22, 2010 01:15
free convective and diffusive mass transfer	rajani	FLUENT	0	July 27, 2005 08:28