CFD Online Discussion Forums
(
https://www.cfd-online.com/Forums/
)
-
CFX
(
https://www.cfd-online.com/Forums/cfx/
)
- -
ICEM-AUTOHEX
(
https://www.cfd-online.com/Forums/cfx/22024-icem-autohex.html
)
tommy
January 10, 2006 08:59
ICEM-AUTOHEX
I perform an autohex mesh in a cubic cell by ANSYS ICEM CFD. Should I also performe "surface mesh" on my 6 families (they are each side of my cubic cell)?
best regards
All times are GMT -4. The time now is
04:39
.
