CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

How to mesh axisymmetric 2D problem using prism...

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 7, 2006, 07:55
Default How to mesh axisymmetric 2D problem using prism...
  #1
sameer
Guest
 
Posts: n/a
How to mesh axisymmetric 3D problem using prism & hexa mesh.

I want to have the prism mesh at the axis & remaing hexa.

can any one help me out.

  Reply With Quote

Old   March 7, 2006, 09:01
Default Re: How to mesh axisymmetric 2D problem using pris
  #2
TB
Guest
 
Posts: n/a
I'll avoid using hybrid mesh like this unless I have particular reason not to do so. Is hexa alone not enough for your problem?
  Reply With Quote

Old   March 7, 2006, 14:14
Default Re: How to mesh axisymmetric 2D problem using pris
  #3
Robin
Guest
 
Posts: n/a
Hi Sameer,

Just create a 2D mesh in Hexa, then revolve the mesh in the ICEM CFD Mesh Editor, specifying 1 element in the revolve direction. I believe MED will merge the nodes at the axis, creating prisms. If it doesn't, Pre may do so for you when it imports the mesh.

-Robin
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ICEM - problems with prism mesh João Lourenço CFX 2 September 18, 2019 04:07
[ICEM] Creation of hexa dominant mesh and prism layer gnuboard ANSYS Meshing & Geometry 7 January 11, 2018 05:13
[Other] engineFoam new mesh problem ayhan515 OpenFOAM Meshing & Mesh Conversion 5 August 10, 2015 09:45
2D axisymmetric Mesh problem in OpenFoam Javed OpenFOAM 3 September 22, 2011 03:23
ICEM CFD Prism Mesh Generation Problem with Ansys 12.0 & windows 7 OS kh_thakor ANSYS Meshing & Geometry 1 February 1, 2011 21:22


All times are GMT -4. The time now is 05:09.