CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Icem CFD 10: Align vertices of splitted edges

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 9, 2006, 05:18
Default Icem CFD 10: Align vertices of splitted edges
  #1
Michele
Guest
 
Posts: n/a
Hello to everybody,

I'm meshing a simple pipe, using Hexa grid and splitting the domain with an O-grid for the boundary layer resolution.

To improve the quality of the mesh, I've splitted the edges of the O grid parallel, using the command "Edit Edge".

My question is: is it possible to align these vertices used to split the edges,with other vertices?

Thank in advance for the attention,

Michele
  Reply With Quote

Old   March 11, 2006, 09:59
Default Re: Icem CFD 10: Align vertices of splitted edges
  #2
Chebeba
Guest
 
Posts: n/a
Why don't you just use the edge parameters to set higher desities, instead of splitting the edges? Splitting edges will make your blocking more (unnecessarily) complex. /C
  Reply With Quote

Old   March 11, 2006, 11:07
Default Re: Icem CFD 10: Align vertices of splitted edges
  #3
Michele
Guest
 
Posts: n/a
Probably I don't explain very well my question!

I don't split the edges, but I add a control point inside the edge to force the edge shape, using some additional points to obtain a spline curve. So my question is: can I align the spline control points in some way?

Thanks again for your attention!!

Michele

PS I've used the command: BLOCKING - Edit Edge - Split edge - Method spline
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Aligned edges in ICEM RichardG ANSYS Meshing & Geometry 28 March 14, 2017 12:40
[snappyHexMesh] SnappyHexMesh for internal Flow vishwa OpenFOAM Meshing & Mesh Conversion 24 June 27, 2016 09:54
Learn ANSYS ICEM CFD easy_astronaut ANSYS 2 December 15, 2013 16:34
icem cfd ai environment 11.0, laptop keyboard problem, linux pertupd Hardware 3 October 3, 2011 09:27
[ICEM] Importing a set of triangles into ICEM CFD rambabu ANSYS Meshing & Geometry 5 November 12, 2009 18:13


All times are GMT -4. The time now is 06:57.