CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

BC setting

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 18, 2006, 10:13
Default BC setting
  #1
Richard
Guest
 
Posts: n/a
Hi, what the different of setting average pressure for inlet and mass flow rate for outlet,with mass flow inlet & pressure outlet
  Reply With Quote

Old   March 20, 2006, 11:49
Default Re: BC setting
  #2
steve
Guest
 
Posts: n/a
Hi richard!! If u use a mass flow rate at the outlet, you enforce the fluid to go out of your domain with a normal direction. If you use a pressure at the outlet, then your fluid are not going to be enforced to go out normally to the boundary limit. The BC could modify the velocity upstream the outlet.

steve
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cells with t below lower limit Purushothama Siemens 2 May 31, 2010 22:58
Sover setting with TUI junbbung FLUENT 0 August 20, 2009 01:43
LiftDrag utility from v12 to v141 cfdphil OpenFOAM Running, Solving & CFD 2 December 5, 2007 06:49
Ultra high temperature? bk Siemens 2 July 19, 2005 01:01
Warning 097- AB Siemens 6 November 15, 2004 05:41


All times are GMT -4. The time now is 05:24.