|
[Sponsors] |
Problem with meshing and hight pressure setting |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
Guest
Posts: n/a
|
Hi, I am using CFX to simulate combustion at hight pressure. First, I don't know how to set the chamber pressure at 0.9 Mpa in CFXPre. Second, when i use extrude in Advenced meshing (the chamber is axisymetric for that i take 2 or 3 deg to have 2D calculations), after getting mesh when i import it in the CFXpre the boundary conditions vanishes. Thank You.
|
|
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|