the inlet pressure about the multiphase flow -- CFD Online Discussion Forums

May 25, 2006, 08:54	the inlet pressure about the multiphase flow	#1
jasonchang Guest Posts: n/a	Hi all, How to set the inlet boundary condition in transient flow ,for example,the inlet pressure. I try to set it use static pressure and total pressure,but it didn't success,because the fluid I used was multiphase,which is compressive.But just as showed in the CFX_POST ,the Pressure only can be used for incompressive fluid. Any reply will be appreciated. with regards,

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
reversed flow at pressure inlet and turbulent viscosity is limited....	cfdiscool	FLUENT	10	June 10, 2015 06:15
total pressure boundary problem ==> flow from outlet to inlet!!	mrshb4	OpenFOAM	0	November 20, 2010 12:41
Mass Flow Inlet	Pravir Kumar Rai	FLUENT	0	February 17, 2003 19:23
pressure gradient term in low speed flow	Atit Koonsrisuk	Main CFD Forum	2	January 10, 2002 10:52
fluid flow fundas	ram	Main CFD Forum	5	June 17, 2000 21:31

All times are GMT -4. The time now is 18:09.