CFD Online Logo CFD Online URL
Home > Forums > CFX

Problem help!!!!!!!

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 23, 2006, 08:33
Default Problem help!!!!!!!
Vijesh Joshi
Posts: n/a
Hi friends..I am simulating the flow over a wedge shaped body using Ansys-CFX. The flow over the wedge is being Hypersonic(M5.75). I am neglecting viscous terms in the energy equation. I made the as blunt body with nose radii of 20, 40, 60, 80 mm one after the other. Now I was expecting the temperature on the surface of the wedge with sharp tip should be more than any other geometry. WHAT I HAVE TO COMPARE IN ORDER TO CONCLUDE THAT, BLUNT BODIES WILL EXPERIENCE LESS HEAT THAN SHARP TIP WEDGE BODIES??? Plz help me. Regards VVJ.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF compiling problem Wouter Fluent UDF and Scheme Programming 6 June 6, 2012 04:43
Gambit - meshing over airfoil wrapping (?) problem JFDC FLUENT 1 July 11, 2011 05:59
natural convection problem for a CHT problem Se-Hee CFX 2 June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 19:13
Is this problem well posed? Thomas P. Abraham Main CFD Forum 5 September 8, 1999 14:52

All times are GMT -4. The time now is 07:23.