CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Help me please. Notice in Pre-solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 6, 2006, 03:18
Default Help me please. Notice in Pre-solver
  #1
Eric
Guest
 
Posts: n/a
Dear Friends,

Cfx-solver gave me the following Notice:

Wall heat transfer coefficient written to the results file was "wall adjacent temperature" for the bulk temperature. If you want to override the bulk temperature then set the expert parameter "tbulk for heat tran coef = <value>"

The fluid in my simulation in compressible air, could you help me to improve the setting in Cfx,Many thanks.

Eric
  Reply With Quote

Old   June 6, 2006, 06:34
Default Re: Help me please. Notice in Pre-solver
  #2
Michael Bo Hansen
Guest
 
Posts: n/a
Don't do anything. We all get that message.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Creating New Solver: For particle-laden compressible jets sankarv OpenFOAM Running, Solving & CFD 17 December 3, 2014 20:41
Quarter Burner mesh with periosic condition SamCanuck FLUENT 2 August 31, 2011 12:34
notice in CFX solver sravani CFX 3 September 27, 2007 14:01
Symmetry plane error in solver Santiago Orrego. CFX 6 January 31, 2007 08:09
Solver Notice in Forced Convection Simulation Miguel CFX 2 September 21, 2006 16:37


All times are GMT -4. The time now is 11:32.