TG-Mesh in CFX Post -- CFD Online Discussion Forums

June 12, 2006, 05:55	TG-Mesh in CFX Post	#1
Christian Guest Posts: n/a	Hello. I have one ask for the use of a Turbogrid mesh in CFXpre. I want to connect a blade with a chamber. The chamber is a 10 degree cutout. The Outlet of Turbogrid is also ten degrees. The cutouts of TG are however not radial and therefore can both mesh´s not be connected. Does someone have an idea how to solve the problem ? Christian.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gambit problems	Althea	FLUENT	22	January 4, 2017 03:19
cfx mesh problem...	mactech001	ANSYS Meshing & Geometry	0	November 5, 2009 02:19
CFX mesh & ICEM	mike	CFX	3	April 27, 2006 15:27
hex mesh using cfx mesh.	mehul	CFX	3	December 12, 2005 22:06
Mesh from ICEM CFD to CFX ! Error ! Why ? Thanks !	Vu Trinh Tuan	CFX	11	March 28, 2005 19:04

All times are GMT -4. The time now is 08:13.