CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

PVM Distributed problem - error connecting

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 4, 2006, 15:41
Default PVM Distributed problem - error connecting
  #1
zaidun
Guest
 
Posts: n/a
Hi

I'm trying to using PVM distrubuted parallel on 2 machine. i was followed the user manual step by step.

before that, i nearly read and did all related sugeestion that publise in this forum but then still not successfull

earlier there was problem with rsh but then it seem ok after using following command:

rsh Jetpod1 cmd /c echo working

After that i run the cfx solver using PVM Distributed Parallel and following warning come out:

+--------------------------------------------------------------------+ | Warning! | | | | rsh connection to host JETPOD1 produces the following output | | before the output of the command: | | | | Terminal readThe handle is invalid. | | | | This may cause problems spawning parallel slaves, especially on | | Windows. | +--------------------------------------------------------------------+

+--------------------------------------------------------------------+ | Warning! | | | | rsh connection to host JETPOD1 produces the following output after | | the output of the command: | | | | : | | | | It could indicate that an rshd service from a different vendor is | | running, which may not provide the necessary functionality. This | | may cause problems spawning parallel slaves. | +--------------------------------------------------------------------+

What confusing me is that the solver still running but using serial mode.

then i tried manually to add slave node using pvm.exe i was used add jetpod1 command and this message come out:

pvm> add JETPOD1 add JETPOD1 0 successful

HOST DTID

JETPOD1 Can't start pvmd

Auto-Diagnosing Failed Hosts... JETPOD1... Verifying Local Path to "rsh"...

Error - File /usr/ucb/rsh Not Found! Determine the path to the "rsh" command on your system, and edit PVM_ROOT\conf\WIN32.def to adjust the path for the -DRSHCOMMAND=\"\" flag. Then recompile PVM and your applications.

Sorry for this long question, i had read nearly all thread in this forum and try everything that had suggested but still doesnt work.

for info, i'm using CFX 10.0, win xp pro, and hp workstation, intel xeon

please help

regards, Zaidun
  Reply With Quote

Old   July 5, 2006, 09:28
Default Re: PVM Distributed problem - error connecting
  #2
Mike
Guest
 
Posts: n/a
Those warnings are just warnings, if the solver continues then you can ignore them. You said the solver continues in serial mode? There's no way the solver will switch from parallel to serial automatically. If you specified parallel and it is running, then it will be running in parallel. Hope this helps, Mike
  Reply With Quote

Old   July 5, 2006, 10:59
Default Re: PVM Distributed problem - error connecting
  #3
Zaidun
Guest
 
Posts: n/a
Thank you for the information Mike
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
area does not match neighbour by ... % -- possible face ordering problem St.Pacholak OpenFOAM 10 February 7, 2024 22:50
conduction problem venkataramana OpenFOAM 3 December 1, 2013 08:30
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
PVM RSH parallel setup problem Windows XP abe CFX 11 January 30, 2006 06:10
Periodic flow boundary condition problem sudha FLUENT 3 April 28, 2004 09:40


All times are GMT -4. The time now is 14:28.