CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Restart of FSI simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 3, 2006, 10:26
Default Restart of FSI simulation
  #1
V. Kumar
Guest
 
Posts: n/a
Hi all

Can anyone tell me how to restart a FSI simulation under the follwoing situations:

1) Restart from the "transient" solution from ANSYS (with no fsi) as an initial field for the FSI simulations.

2) A normal restart from previously stored FSI data.

I know how to make a restart from exisitng CFX solution but not for the case of ANSYS-transient (finite element solution) to MFX computation.

Can anyone explain the way to do this with one example each for the above mentioned situations? Or is it not possible in ANSYS10.0 to make above kind(s) of restarts?

thanks

  Reply With Quote

Old   July 3, 2006, 12:48
Default Re: Restart of FSI simulation
  #2
Joe
Guest
 
Posts: n/a
What are you using for the FEM calcs? What platform/OS are you running on?
  Reply With Quote

Old   July 3, 2006, 14:12
Default Re: Restart of FSI simulation
  #3
V. Kumar
Guest
 
Posts: n/a
I think I mentioned in my previous mail that I am using ANSYS-CFX10.0 for the FSI coupling using MFX. Operating systems Linux Suse9.0 64-bit AMD and Win-XP Intel 32 bit.

  Reply With Quote

Old   July 20, 2006, 14:23
Default Re: Restart of FSI simulation
  #4
wallingj
Guest
 
Posts: n/a
I have viewed your ANSYS .dat file from your old item. You have to insert "save" to your old .dat file.

Then use the following steps

1, run the MFX until it finishes itself

2, insert these command to you .dat file /batch,list resume,ANSYS,db /solu mfrs,2.0 mfti,3 solve save

3, restart MFX

Now I am using the same software as you use to solve the FSI problems. I hope we could discuss this MFX program further.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Restart 2-way FSI with different timestep? Lance CFX 10 April 17, 2013 01:37
2 way FSI simulation errors ninjabro CFX 1 September 8, 2011 09:23
FSI: change material parameters before restart Lance CFX 2 September 30, 2010 09:38
FSI simulation is DEAD SLOW Lance CFX 6 September 12, 2009 10:00
how to extend FSI 2D codes to 3D, need advises abouziar Main CFD Forum 1 May 30, 2008 05:08


All times are GMT -4. The time now is 04:45.