CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Two phase convergence problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 24, 2006, 10:44
Default Two phase convergence problem
  #1
Kjetil W
Guest
 
Posts: n/a
Hi. I'm simulating a two phase(gas and liquid) flow through some piping that consists of some bends and different pipe-sizes(mostly 12", 10", 8").

Flow: 6648m3/day liquid 100648sm3/day gas Op.pressure=8bar Density liquid=920kg/m3 Op.temp=80C Kinematic viscosity for liquid=15cSt (@80C)

I have troubles with getting a good convergence. The results I get shows that most of the streamlines ends up with 0 velocity midway throug the piping where I have a sharp turn, and narrow geometry. Is it a mesh-problem? It's my first attempt at a two phase simulation, so I could need som help..
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Convergence Centurion2011 FLUENT 48 June 15, 2022 00:29
CM+5 Convergence of the nonstationary problem ILYA87 STAR-CCM+ 0 May 22, 2011 05:35
two phase stratified flow. convergence problem moas CFX 0 September 7, 2008 16:32
CONVERGENCE PROBLEM - oil boiler MM FLUENT 1 February 15, 2007 06:24
Help - Two Phase Flow - Convergence Problem R.Sureshkumar Main CFD Forum 1 February 22, 2000 04:24


All times are GMT -4. The time now is 23:52.