[CFD-POST] Camera View Orthogonal

marcel_jay · October 22, 2015, 07:28

Dear Community,

does anybody have an idea how to set the camera orthogonal to a custom plane (made from three wildly distributed points).

I tried the solutions offered in different threads with no success like the CCL Option = Pivot Point and Rotation.
Which when "Processed" hides my model and from seeing the corrdinate system, changing the rotation by 90° is just changing it orthogonal to another main choordinate plane.

I'm using ANSYS 16.2.

If anyone could help me, I'd be grateful otherwise I'll contact the ANSYS Support and let everyone know.

Cheers
Marcel

marcel_jay · October 28, 2015, 07:34

So to let you know what I found out:
First of all, units are in meters.
Second, it worked quite well with a script using "Option = Pivot Point and Quaternion", which can be found under #2037382.

Then you just need to calculate the orthogonal vector of the plane.

October 22, 2015, 07:28	[CFD-POST] Camera View Orthogonal	#1
marcel_jay Member Marcel Jay Join Date: Jun 2014 Location: Berlin Posts: 52 Rep Power: 11	Dear Community, does anybody have an idea how to set the camera orthogonal to a custom plane (made from three wildly distributed points). I tried the solutions offered in different threads with no success like the CCL Option = Pivot Point and Rotation. Which when "Processed" hides my model and from seeing the corrdinate system, changing the rotation by 90° is just changing it orthogonal to another main choordinate plane. I'm using ANSYS 16.2. If anyone could help me, I'd be grateful otherwise I'll contact the ANSYS Support and let everyone know. Cheers Marcel

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[CFD Post] Graph with Mean Local Velocity	lucasphp	ANSYS	0	January 7, 2014 17:13
[CFD - Post] Discrepancy between areaInt of Pressure	ziggo	Visualization & Post-Processing	0	September 4, 2013 11:25
[CFD Post] Rescale the Viewer	max3.2	ANSYS	1	September 5, 2011 14:13
[CFD Post] Surface streamlines not located where needed	siw	CFX	1	July 7, 2011 19:13
[CFD Post] Displaying boundary layer profiles	siw	CFX	0	July 4, 2011 12:15

October 28, 2015, 07:34		#2
marcel_jay Member Marcel Jay Join Date: Jun 2014 Location: Berlin Posts: 52 Rep Power: 11	So to let you know what I found out: First of all, units are in meters. Second, it worked quite well with a script using "Option = Pivot Point and Quaternion", which can be found under #2037382. Then you just need to calculate the orthogonal vector of the plane.