convergence problem

September 14, 2006, 02:55

Hi everybody, I try to solve flow through centrifugal compressor stage - rotor stator interaction - transient. First I solved it in the design point and it was OK. Now I try it for non-design point(lower massflow) and I have problem with convergnece. I tried all tech tips etc. Any ideas? Thanks Jindra

September 17, 2006, 01:33

The same thing i am attempting for a blower. as soon as i will be ble to resolve the issue i will inform u. In case u resolve this problem. please take time to inform me

September 18, 2006, 00:41

Ok, thanks.

September 14, 2006, 02:55	convergence problem	#1
Jindra Guest Posts: n/a	Hi everybody, I try to solve flow through centrifugal compressor stage - rotor stator interaction - transient. First I solved it in the design point and it was OK. Now I try it for non-design point(lower massflow) and I have problem with convergnece. I tried all tech tips etc. Any ideas? Thanks Jindra

September 17, 2006, 01:33	Re: convergence problem	#2
rakesh Guest Posts: n/a	The same thing i am attempting for a blower. as soon as i will be ble to resolve the issue i will inform u. In case u resolve this problem. please take time to inform me

September 18, 2006, 00:41	Re: convergence problem	#3
Jindra Guest Posts: n/a	Ok, thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
convergence problem when use pisoFoam, LES for wind tunnel case	Forrest_Lei	OpenFOAM	3	July 19, 2011 06:00
convergence problem	commonyue	Main CFD Forum	1	December 1, 2009 03:54
Convergence of CFX field in FSI analysis	nasdak	CFX	2	June 29, 2009 01:17
3D Fluid Flow Convergence problem	Emily	FLUENT	2	March 21, 2007 22:18
Non Convergence of 3D Heat transfer cfd problem	Balraj	Main CFD Forum	3	December 9, 2004 00:24