workbench geometry in ICEM

October 30, 2006, 06:24

Hi all, I want to know whether we can open workbench geometry in ICEM , can we export the geometry to ICEM from workbench, thank you

October 30, 2006, 13:32

If you're in WorkBench on the Project Page there is a way to click on the Geometry simply select "Proceed to Advanced Meshing" or something like that. I forget the actual method.

October 31, 2006, 01:29

Hi can anyone guide me to how can I start CFX by the workbench Khalid

October 31, 2006, 07:48

You will need the Advanced CFD tab in Workbench. This is CFX. Of course - you'll need licenses for CFX.

November 1, 2006, 04:16

Are you mean that CFX was differ from workbench?

November 1, 2006, 08:06

Yes - Workbench is simply a repository/linker for the various codes that Ansys sells: Ansys, Design Modeler, ICEM CFD, CFX, etc. Each of the actual selling products is licensed separately.

November 2, 2006, 06:51

so can you send me copy of CFX by mailing address. I am in Iraq and I cannot get copy of it anymore. I hope you assist me. thanks

October 30, 2006, 06:24	workbench geometry in ICEM	#1
Ross Guest Posts: n/a	Hi all, I want to know whether we can open workbench geometry in ICEM , can we export the geometry to ICEM from workbench, thank you

October 30, 2006, 13:32	Re: workbench geometry in ICEM	#2
myron Guest Posts: n/a	If you're in WorkBench on the Project Page there is a way to click on the Geometry simply select "Proceed to Advanced Meshing" or something like that. I forget the actual method.

October 31, 2006, 01:29	Re: workbench geometry in ICEM	#3
KBS Guest Posts: n/a	Hi can anyone guide me to how can I start CFX by the workbench Khalid

October 31, 2006, 07:48	Re: workbench geometry in ICEM	#4
myron Guest Posts: n/a	You will need the Advanced CFD tab in Workbench. This is CFX. Of course - you'll need licenses for CFX.

November 1, 2006, 04:16	Re: workbench geometry in ICEM	#5
KBS Guest Posts: n/a	Are you mean that CFX was differ from workbench?

November 1, 2006, 08:06	Re: workbench geometry in ICEM	#6
myron Guest Posts: n/a	Yes - Workbench is simply a repository/linker for the various codes that Ansys sells: Ansys, Design Modeler, ICEM CFD, CFX, etc. Each of the actual selling products is licensed separately.

November 2, 2006, 06:51	Re: workbench geometry in ICEM	#7
KBS Guest Posts: n/a	so can you send me copy of CFX by mailing address. I am in Iraq and I cannot get copy of it anymore. I hope you assist me. thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEM Fuel cell module meshes. ICEM vs workbench	aarvay	FLUENT	24	March 2, 2020 06:50
[ICEM] Geometry in ICEM CFD	DaIN	ANSYS Meshing & Geometry	7	January 3, 2012 11:32
How to integrate ICEM CFD with Ansys Workbench ?	radompon	CFX	9	July 1, 2009 16:12
EXTRUDE option in ICEM CFD Geometry	Mohammad Faridul Alam	CFX	4	October 25, 2007 17:47
workbench to ICEM	erick	CFX	3	August 21, 2006 02:06