CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

creating CFX mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 15, 2007, 19:25
Default creating CFX mesh
  #1
igor
Guest
 
Posts: n/a
I have a question concerning more ansys workbench v9 than CFX module.I have to simulate the 3D heat transfer among heating parts inside a box and internal-external walls through a fluid. I've created firstly a fluid as a solid element with FIll command, then I've frozen all the parts and with body operation->slice material created the intersection. Is it the proper way? Is there any difference between slice and cut material in frozen/unfrozen mode? and is it really necessary to freeze the parts? Then I exported the model in CFX-Mesh, having difficulties with volume generation: probably it depends on the complex geometry. I found only this notes on the help documentation. Is there a simpler way to simulate the presence of a fluid inside a box, without incurring in such intersection difficulties? The problem is also the asymmetry of the model I have to study. Thank you in advance! Eng. Igor Di Varano,Italy
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 07:09
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
Creating a 2D Mesh using ICEM VSB CFX 0 November 1, 2006 23:17
[Other] Problem when trying to generate a new mesh gaottino OpenFOAM Meshing & Mesh Conversion 0 June 30, 2006 08:51
CFX mesh & ICEM mike CFX 3 April 27, 2006 16:27


All times are GMT -4. The time now is 00:52.