CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Post: Particles Rate per Volume

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 5, 2007, 13:59
Default Post: Particles Rate per Volume
  #1
Rita
Guest
 
Posts: n/a
Would anyone know how I would go about finding out how many particles have passage through a small volume of my domain over a specified time period? Is this possible? Do I have to create sub-domains?

The option "particle number rate" can not be activated for anything except "function calculator".

Also I've look in the manuals, but I can find a clean definite of what "particle volume fraction" mean in CFX-Post. When I plot this on a log scale I get 1 for where there are particles and 0 for where there are no particles passing through the domain.

Thank you!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 07:09
mass flow rate (CFX post) sanchezz CFX 2 January 14, 2010 07:54
particles model ati_ros61 FLOW-3D 3 December 6, 2009 17:03
exporting isosurface or volume from cfx post bryant CFX 0 January 23, 2008 23:01
How to get volume flow rate of a section? Nyquist Siemens 1 September 14, 2003 01:27


All times are GMT -4. The time now is 06:09.