CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   Mismatch nodes on periodic face>tolerance (https://www.cfd-online.com/Forums/cfx/23539-mismatch-nodes-periodic-face-tolerance.html)

chotet January 16, 2007 22:54

Mismatch nodes on periodic face>tolerance
 
above is my problem after generating surface mesh.are there any problem if i still continue with the analysis if i have the above problem?will it be any problem occuring the solver later? thank you...

Johnny January 19, 2007 00:26

Re: Mismatch nodes on periodic face>tolerance
 
You won't be able to use a 1:1 match for the periodic interface in CFX - you will need to use GGI.

Joe January 19, 2007 09:37

Re: Mismatch nodes on periodic face>tolerance
 
Not so.


All times are GMT -4. The time now is 03:26.