PROBLEM IN SOLVER RUNNING PARALLEL

February 2, 2007, 04:09

I cannot wonder the solution, and the people of ANSYS Support was not able to give me a solution after 10 mails.

When i run solver CFX 10.0 in parallel mode (boths MPICH or PVM), the proccesors freeze after 20 - 30 - 40 - 50 iterations. The RAM is 100% working and full.

The simulation is medium - large size.

All posible solution will be welcome, and would help me very much.

If someone need more information to help me, please, ask me.

My configuration is 4 machines Intel 64 bit Dual Core, with 8GB RAM each. I use Gbit Net to comunicate them.

I have a Red hat Linux as Master, and place from run the CFX, and in the slaves partitions there is a Windows X64 (not XP 64) running.

Thank you very much in advance´.

February 2, 2007, 10:26

Why not make all machines the same operating system?

February 2, 2007, 17:21

In fact, i wanted to remark that there are machines which in normal use, run Windows, but they have Linux partitions to execute CFX in parallel mode. Excuse me for the missunderstanding.

Thank you, i still wait for answers

February 4, 2007, 05:08

Did you think about the temperature of proccessors?

February 2, 2007, 04:09	PROBLEM IN SOLVER RUNNING PARALLEL	#1
ÃÃ±igo Guest Posts: n/a	I cannot wonder the solution, and the people of ANSYS Support was not able to give me a solution after 10 mails. When i run solver CFX 10.0 in parallel mode (boths MPICH or PVM), the proccesors freeze after 20 - 30 - 40 - 50 iterations. The RAM is 100% working and full. The simulation is medium - large size. All posible solution will be welcome, and would help me very much. If someone need more information to help me, please, ask me. My configuration is 4 machines Intel 64 bit Dual Core, with 8GB RAM each. I use Gbit Net to comunicate them. I have a Red hat Linux as Master, and place from run the CFX, and in the slaves partitions there is a Windows X64 (not XP 64) running. Thank you very much in advance´.

February 2, 2007, 10:26	Re: PROBLEM IN SOLVER RUNNING PARALLEL	#2
Bian Guest Posts: n/a	Why not make all machines the same operating system?

February 2, 2007, 17:21	Re: PROBLEM IN SOLVER RUNNING PARALLEL	#3
ÃÃ±igo Guerrero Mendicoa Guest Posts: n/a	In fact, i wanted to remark that there are machines which in normal use, run Windows, but they have Linux partitions to execute CFX in parallel mode. Excuse me for the missunderstanding. Thank you, i still wait for answers

February 4, 2007, 05:08	Re: PROBLEM IN SOLVER RUNNING PARALLEL	#4
Peter Graham Guest Posts: n/a	Did you think about the temperature of proccessors?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem when running rhoSonicFoam solver	gaottino	OpenFOAM Running, Solving & CFD	3	March 1, 2011 04:59
Problem in running Parallel	mamaly60	OpenFOAM Running, Solving & CFD	1	April 19, 2010 11:11
Coupled solver energy equation problem	lucioantonio	FLUENT	0	April 3, 2009 10:21
InterFoam problem running parallel	vatant	OpenFOAM Running, Solving & CFD	0	April 28, 2006 19:22
Problem using parallel Fluent	Gustavo	FLUENT	0	June 27, 2004 23:12