CFD Online Logo CFD Online URL
Home > Forums > CFX

Turbulence Model Option

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 21, 2007, 22:49
Default Turbulence Model Option
Posts: n/a
In spray drying model, initially the droplet is injected with high speed (turbulence flow) and due to the drag force the droplet speed fall down (laminar flow). Therefore which turbulence model option I have to select k-Epsilon or None (Laminar).

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
increasing mesh quality is leading to poor convergence tippo CFX 2 May 5, 2009 10:55
Single Bubble Gerrit Senger CFX 4 March 12, 2007 17:29
Has anyone successfully used transition modell..p2 PetrK CFX 12 May 26, 2006 16:27
particle tracking mike CFX 3 April 17, 2006 00:05
Water vapour condensation in CFX-5.7.1 hdj CFX 1 November 27, 2005 08:15

All times are GMT -4. The time now is 20:23.