CFD Online Logo CFD Online URL
Home > Forums > CFX

overflow error on linux cluster

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 1, 2007, 12:45
Default overflow error on linux cluster
Posts: n/a

I am conducting a compressible CFX10 simulation. The weired thing is, the simulation runs ok on the local PC, but always fails on linux cluster. The error information is overflow.

How to fix it? Thanks a lot

Equation | Rate | RMS Res | Max Res | Linear Solution | U-Mom | 0.00 | 1.3E-12 | 3.7E-11 | 4.7E+08 F | V-Mom | 0.00 | 9.2E-12 | 1.5E-10 | 2.4E+08 F | W-Mom | 0.00 | 3.6E-12 | 7.2E-11 | 6.3E+08 F | P-Mass| 0.00 | 4.2E-22 | 2.0E-20 | 9.3 4.5E+08 F |

ERROR #001100279 has occurred in subroutine c_fpx_handler: Floating point exception: Overflow

  Reply With Quote

Old   March 13, 2007, 09:05
Default Re: overflow error on linux cluster
Posts: n/a
Could be due to partitioning. To confirm, try running on the linux cluster using the same number of partitions as the local PC. If that works, then look at where your partition boundaries lie on the case that fails.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Linux Cluster Manager from SGI out for X86 Shelly Zavoral Main CFD Forum 0 February 13, 2009 13:26
LINUX cluster and server azmir Siemens 6 September 17, 2006 19:09
Linux Cluster Performance with a bi-processor PC M. FLUENT 1 April 22, 2005 09:25
Linux Cluster Setup Problems Bob CFX 1 October 3, 2002 18:08

All times are GMT -4. The time now is 20:23.