|
[Sponsors] |
March 1, 2007, 12:45 |
overflow error on linux cluster
|
#1 |
Guest
Posts: n/a
|
hi,
I am conducting a compressible CFX10 simulation. The weired thing is, the simulation runs ok on the local PC, but always fails on linux cluster. The error information is overflow. How to fix it? Thanks a lot Equation | Rate | RMS Res | Max Res | Linear Solution | U-Mom | 0.00 | 1.3E-12 | 3.7E-11 | 4.7E+08 F | V-Mom | 0.00 | 9.2E-12 | 1.5E-10 | 2.4E+08 F | W-Mom | 0.00 | 3.6E-12 | 7.2E-11 | 6.3E+08 F | P-Mass| 0.00 | 4.2E-22 | 2.0E-20 | 9.3 4.5E+08 F | ERROR #001100279 has occurred in subroutine c_fpx_handler: Floating point exception: Overflow |
|
March 13, 2007, 09:05 |
Re: overflow error on linux cluster
|
#2 |
Guest
Posts: n/a
|
Could be due to partitioning. To confirm, try running on the linux cluster using the same number of partitions as the local PC. If that works, then look at where your partition boundaries lie on the case that fails.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Linux Cluster Manager from SGI out for X86 | Shelly Zavoral | Main CFD Forum | 0 | February 13, 2009 13:26 |
LINUX cluster and server | azmir | Siemens | 6 | September 17, 2006 20:09 |
Linux Cluster Performance with a bi-processor PC | M. | FLUENT | 1 | April 22, 2005 10:25 |
Linux Cluster Setup Problems | Bob | CFX | 1 | October 3, 2002 19:08 |