Boundary Layer Velocity Profile for Pitching/Morphing Airfoil

tsprengeler · July 9, 2021, 20:30

Hi All,

I'm looking to extract velocity profiles in CFD-Post for a pitching and morphing airfoil simulation in CFX. I know how to calculate the line normal to a point of the airfoil and extract the data for a static airfoil. The problem I'm having is that my airfoil is going to be pitching up and down as well as morphing in shape. I want to extract the same three locations on the pressure and suction surface of the airfoil at any given time.

Does anyone have a good solution to this problem? Any sort of automation to complete this task?

Thanks in advance for any and all advice,

Thomas

ghorrocks · July 10, 2021, 04:20

If you define monitor points on the locations of interest you can set that they move with the mesh. So as long as you don't slide along your mesh or remesh this should work.

tsprengeler · July 14, 2021, 11:03

Quote:

Originally Posted by ghorrocks

If you define monitor points on the locations of interest you can set that they move with the mesh. So as long as you don't slide along your mesh or remesh this should work.

Thank you very much for the reply. I will go ahead and try this out with a previous pitching simulation I set up and see what kind of results I get.

Thomas

July 9, 2021, 20:30	Boundary Layer Velocity Profile for Pitching/Morphing Airfoil	#1
tsprengeler New Member Minnesota Join Date: Feb 2021 Posts: 4 Rep Power: 5	Hi All, I'm looking to extract velocity profiles in CFD-Post for a pitching and morphing airfoil simulation in CFX. I know how to calculate the line normal to a point of the airfoil and extract the data for a static airfoil. The problem I'm having is that my airfoil is going to be pitching up and down as well as morphing in shape. I want to extract the same three locations on the pressure and suction surface of the airfoil at any given time. Does anyone have a good solution to this problem? Any sort of automation to complete this task? Thanks in advance for any and all advice, Thomas

July 10, 2021, 04:20		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	If you define monitor points on the locations of interest you can set that they move with the mesh. So as long as you don't slide along your mesh or remesh this should work. aero_head and tsprengeler like this. __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 07:38
T-S disturbances without noise/turbulence in airfoil boundary layer?	kepler123	Main CFD Forum	7	November 26, 2020 10:53
Problem with assigned inlet velocity profile as a boundary condition	Ozgur_	FLUENT	5	August 25, 2015 04:58
An error has occurred in cfx5solve:	volo87	CFX	5	June 14, 2013 17:44
How do you extract boundary layer profile on an airfoil	Nick R	CFX	3	December 19, 2011 05:43