CFD Online Discussion Forums

CFD Online Discussion Forums (
-   CFX (
-   -   Droplet boundary layer (

Neser25 March 14, 2007 09:20

Droplet boundary layer
Any one know, how to simulate falling droplet on a vertical wall (boundary layer study + heat and mass transfer study) IN CFX 10


Joe March 14, 2007 13:49

Re: Droplet boundary layer
Just getting the cold flow model right would require carefull validation against experimental data. Surface tension effects on real surfaces are notoriously finicky e.g. composition, contamination, roughness, ...

If you dont have good experimental data to validate against, you are going to have to do that first anyway, which may make using CFD redundant.

All times are GMT -4. The time now is 10:45.