CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

2D simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 26, 2007, 04:21
Default 2D simulation
  #1
siavash
Guest
 
Posts: n/a
I used CFX10.0 to simulate a 3D project now I want to make a 2D model but when I want to generate a CFX mesh an error message displays:"there is not any body".How can I create a 2D model without error?Can anyone answer to me? Thanks
  Reply With Quote

Old   May 26, 2007, 07:26
Default Re: 2D simulation
  #2
ousel
Guest
 
Posts: n/a
hi, for all, i would simulate a 2d probleme and i have probleme that in my probleme i should have a porous wall then how to create a new type of bc's in fluent like wall but by suctiob. and thank's
  Reply With Quote

Old   May 27, 2007, 21:58
Default Re: 2D simulation
  #3
brunoc
Guest
 
Posts: n/a
Actually, CFX-Mesh (and the CFX-Solver) won't take 2D meshes. They only work in 3D, and that is probably why you're getting an error. To simulate a 2D model you can make a mesh that is one element thick in the normal direction. CFX-Mesh allows you to do this, as long as you have a 3D geometry. Just go to 'Mesh > Options > Meshing Strategy = Extruded 2D Mesh'.

Hope it helps.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why my simulation not agree with the wind tunnel experiment zhaowei CFX 4 July 11, 2015 04:36
Solar Radiation in OpenFOAM plainstyle OpenFOAM Running, Solving & CFD 15 July 8, 2014 05:43
Simulation of a complex wing in solidworks flow simulation niels1900 FloEFD, FloWorks & FloTHERM 6 April 20, 2011 11:44
Continuous vs interrupted simulation sega OpenFOAM Running, Solving & CFD 4 November 3, 2008 15:29
strange simulation error Ralf Schmidt FLUENT 2 May 4, 2007 14:02


All times are GMT -4. The time now is 14:27.