How could you set a fixed laminar to turbulent transition location?

VentifordShaun · February 2, 2022, 10:20

I would like to set the laminar to turbulent transition location at the point where the grit is used in the experiment to compare with data. How would you do this in CFX? Thanks.

ghorrocks · February 2, 2022, 17:00

Use the SST turbulence model with the turbulent transition model. The default turbulent transition model is Gamma Theta, but if you change that to Specified Intermittency you can define where turbulent transition occurs with a CEL expression.

See Solver Modelling Guide, section 4.1.11

VentifordShaun · February 3, 2022, 16:37

Okay thanks. I thought you would use the specified intermittency option, just not sure what the CEL expressions would look like. Where can I find the Solver modelling guide?

ghorrocks · February 3, 2022, 17:56

The Solver Modelling Guide is one of the CFX documentation manuals. You can access it through the help menu.

The CEL function will need to be a 3D function (even 4D if it changes with time) which defines whether each point in the domain is laminar or turbulent.

February 2, 2022, 10:20	How could you set a fixed laminar to turbulent transition location?	#1
VentifordShaun New Member Shaun Adams Join Date: Feb 2022 Posts: 2 Rep Power: 0	I would like to set the laminar to turbulent transition location at the point where the grit is used in the experiment to compare with data. How would you do this in CFX? Thanks.

February 2, 2022, 17:00		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	Use the SST turbulence model with the turbulent transition model. The default turbulent transition model is Gamma Theta, but if you change that to Specified Intermittency you can define where turbulent transition occurs with a CEL expression. See Solver Modelling Guide, section 4.1.11 Opaque likes this. __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

February 3, 2022, 17:56		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	The Solver Modelling Guide is one of the CFX documentation manuals. You can access it through the help menu. The CEL function will need to be a 3D function (even 4D if it changes with time) which defines whether each point in the domain is laminar or turbulent. __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with divergence	TDK	FLUENT	13	December 14, 2018 06:00
[snappyHexMesh] determining displacement for added points	CFDnewbie147	OpenFOAM Meshing & Mesh Conversion	1	October 22, 2013 09:53
Laminar Turbulent Transition	Typhoon	SU2	3	March 6, 2013 11:09
SimpleFoam: Laminar vs. Turbulent Convergence	JasonG	OpenFOAM	0	June 2, 2011 08:29
Env variable not set	gruber2	OpenFOAM Installation	5	December 30, 2005 04:27

February 3, 2022, 16:37		#3
VentifordShaun New Member Shaun Adams Join Date: Feb 2022 Posts: 2 Rep Power: 0	Okay thanks. I thought you would use the specified intermittency option, just not sure what the CEL expressions would look like. Where can I find the Solver modelling guide?