 |
 |
 |
|
|
|
[Sponsors] | ||||
June 21, 2007, 07:56
|
Turbo Post
|
#1 |
|
Guest
Posts: n/a
|
Hi,
I have an Impeller which I would like to post process using CFX11. In turbo post, when i try to contour plot the Pressure ACA on meridional surface, I get a blank screen, the same appears for all ACA variables. But it works fine for other variables like Pressure, total Pressure etc...can someone tell me the reason? or am I doing something wrong? Thanks, Sans |
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| NO model vs post processing in coal combustion,CFX | sakalido | CFX | 1 | April 15, 2011 15:07 |
| Export from post gives different result between v11 and v12 | bennn | CFX | 2 | February 10, 2011 06:38 |
| post processing for KIVA | dirga | Main CFD Forum | 5 | April 23, 2009 11:58 |
| Stator tip gap at hub in turbogrid /CFX post turbo | Adam | CFX | 1 | May 29, 2006 05:47 |
| Post Processing in FEM | Abhijit Tilak | Main CFD Forum | 0 | April 26, 2004 12:59 |
Linear Mode
