CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Mass flow rate for fractions

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree3Likes
  • 3 Post By ghorrocks

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 7, 2022, 05:29
Default Mass flow rate for fractions
  #1
New Member
 
Andrey
Join Date: Apr 2019
Posts: 3
Rep Power: 6
andpush is on a distinguished road
Dear all,

I have a problem to compute mass flow rate throw a surface in the case of two phases flow water/air.

My expression is
massFlowInt(Air.Volume Fraction)@surface

When I test it in cfx-post to compute this value it is working fine. Nevertheless when I define it as monitor expression for the new task it does not work


An error: Missing phase tag for callback function massFlowInt(Air.Volume Fraction)@REG1


Is Any know what is a problem here? Thanks!
andpush is offline   Reply With Quote

Old   April 7, 2022, 06:44
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
There are a few CEL functions which use slightly different syntax for handling multiphase simulations - massFlowInt is one of them. Also, you will probably want the massFlow() function rather than doing the integration yourself.

So the CEL expression you probably want is Air.massFlow()@REG1
Opaque, andpush and aero_head like this.
__________________
Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.
ghorrocks is offline   Reply With Quote

Old   April 7, 2022, 06:54
Default
  #3
New Member
 
Andrey
Join Date: Apr 2019
Posts: 3
Rep Power: 6
andpush is on a distinguished road
Thanks. Problem resolved!
andpush is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure drop and Mass flow rate jzyk1212 STAR-CCM+ 0 February 1, 2021 14:31
rhoSimpleFoam with specified mass flow rate at outlet ishan_ae OpenFOAM Running, Solving & CFD 3 September 1, 2020 02:11
Mass flow rate history over solution step- rhoSimpleFoam gian93 OpenFOAM Post-Processing 0 December 8, 2019 11:20
Higher mass flow rate at outlets as compare to inlet Ahmed Saieed FLUENT 0 April 4, 2016 00:08
Calculating mass flow rate at multiphase flows Kuslo187 OpenFOAM Post-Processing 1 August 21, 2015 19:11


All times are GMT -4. The time now is 05:40.