CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

ICEM geometry update

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 4, 2007, 16:55
Default ICEM geometry update
  #1
Omar
Guest
 
Posts: n/a
Hi, I am working with the new ANSYS workbench "CFX 11". I am having trouble using ICEM to update the geometry. After setting the ICEM project and creating a decent mesh, I run the CFD simulations and based on the results I try to change some geometrical parameters like the hight of the channel, however once I click the update geometry\replace, all the parts and naming convention are deleted. I am trying to use CFX mesh, but I can not get good results for the mesh, especially prism layers. Thanks in advance, Omar
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
geometry import problems (STEP into ICEM) Toralf CFX 10 March 7, 2014 22:17
Can't import geometry file from Icem CFD to Ansys Workbench Julien87 ANSYS Meshing & Geometry 1 July 19, 2011 17:50
Update Geometry - swapping SolidWorks files sanchezz CFX 7 December 9, 2009 23:18
Design Modeler to ICEM..... Joe CFX 0 January 24, 2008 04:39
workbench geometry in ICEM Ross CFX 6 November 2, 2006 07:51


All times are GMT -4. The time now is 02:47.