CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

how to choose Interface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 7, 2007, 03:00
Default how to choose Interface
  #1
prateek jain
Guest
 
Posts: n/a
Hi

I am new user in CFX I am working on a model in which there is rotating part I am using General mode. Facing problem to define interface in that. 3 bodys are there 1 Cylinder 2 rotating air domain 3 air domain Plaese help me for that
  Reply With Quote

Old   July 7, 2007, 05:18
Default Re: how to choose Interface
  #2
Amir Jourak
Guest
 
Posts: n/a
hi,

I'm doing some rotation simulation too. In CFX pre try tools/turbo mode it will gives you easier way to define interface.

  Reply With Quote

Old   July 8, 2007, 05:23
Default Re: how to choose Interface
  #3
pankaj
Guest
 
Posts: n/a
Hi Prateek!

For an interface between rotating and stationary domain,u need two mesh surfaces at the same location.

Define frozen rotor & its subsequent parameters as related to your problem.

Mesh rot and stationary domains separately,then import and attach them in Pre.

And if u r asking abt the location of interface,then its totally case dependent.

Try it out yourself.

Pankaj.
  Reply With Quote

Old   July 12, 2007, 00:56
Default Re: how to choose Interface
  #4
prateek jain
Guest
 
Posts: n/a
Hi Amir Jourak, You suggestion is good. I solved the turbo tutorial, given in cfx help. I am confused in domain part in my problem please give me your Personal ID so I can directly contact u. I am briefly explain here my problem I want to give a rotatary motion to a cylinder. for which I made a Cylinder, a rotating domain air outside to it and a air domain. In generalmode I given rotating motion to rotating domain and made cylinder and air domain stationary. In turbo mode what can I do?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
CFX Solver Memory Error mike CFX 1 March 19, 2008 08:22
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55
Replace periodic by inlet-outlet pair lego CFX 3 November 5, 2002 21:09


All times are GMT -4. The time now is 13:01.