CFD Online Discussion Forums

CFD Online Discussion Forums (
-   CFX (
-   -   CFX on Linux (

Ioakimidis Konstantinos July 12, 2007 12:11

CFX on Linux
Could you help me please?

What I have to do, if I want to run CFX-Pre or CFX-Post on Suse Linux 10.2?

I appreciate much for your help!

KB July 13, 2007 09:31

Re: CFX on Linux
Buy a license and just install it.

Bart July 15, 2007 00:43

Re: CFX on Linux

hayate July 16, 2007 16:20

Re: CFX on Linux
well sometimes it can not work with not a license from ansys............

they say that you must pay for that..... and i believe so

best regards

Bart July 16, 2007 21:17

Re: CFX on Linux
No seriously, Ioakimidis probably has problems with the graphics. You need to read the manual on what libraries you should have on your system or what options to set for CFX to get CFX-post and pre running. I normally run my simulations on a linux cluster but pre and post is done on a windows desktop.

hayate July 17, 2007 08:24

Re: CFX on Linux
we also working on linux.... but the pre and post on windows...... if you have only one workstation make 2 disk parts put win on one and linux on the other... make pre with win and run under linux,,,,,

best regards

Ioakimidis Konstantinos July 17, 2007 10:05

Re: CFX on Linux
I have Linux 10.2 and ANSYS v10 doesn't work! The pre,post and Solver working properly if you have ANSYS 11. I has nothing to do with Licence!!!I have all licences. I have already solved my problem!Thank you for your help!

Mr. Solution Guy August 3, 2007 13:05

Re: CFX on Linux
This works for 32bit machines for cfx pre and post. I have not,however, been able to get workbench to work yet...

open .bashrc file and add:

export LD_PRELOAD=/lib/

All times are GMT -4. The time now is 18:55.