An error when compiling the CFX solver

bassamelsayed · May 3, 2022, 12:02

the error message is :
( A wall has been placed at the portion(s) of an outlet Boundary conditions (at 2.2% of the faces, 2.9% of the area) to prevent fluid from flowing into the domain.
The B.C. name is: S2 outlet
The fluid name is: fluid 1

issue 1-1.jpg

issue 1.jpg

Gert-Jan · May 3, 2022, 12:59

Go to the FAQ - http://www.cfd-online.com/Wiki/Ansys_FAQ

bassamelsayed · May 13, 2022, 08:12

Quote:

Originally Posted by Gert-Jan

Go to the FAQ - http://www.cfd-online.com/Wiki/Ansys_FAQ

Thanks it was very helpful.

May 3, 2022, 12:02	An error when compiling the CFX solver	#1
bassamelsayed New Member Bassam Elsayed Join Date: Sep 2021 Posts: 13 Rep Power: 5	the error message is : ( A wall has been placed at the portion(s) of an outlet Boundary conditions (at 2.2% of the faces, 2.9% of the area) to prevent fluid from flowing into the domain. The B.C. name is: S2 outlet The fluid name is: fluid 1 issue 1-1.jpg issue 1.jpg

May 3, 2022, 12:59		#2
Gert-Jan Senior Member Gert-Jan Join Date: Oct 2012 Location: Europe Posts: 1,953 Rep Power: 28	Go to the FAQ - http://www.cfd-online.com/Wiki/Ansys_FAQ bassamelsayed likes this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fail to converge when solving with a fabricated solution	zizhou	FLUENT	0	March 22, 2021 06:33
The ANSYS CFX solver exited with return code 38	shmitzps	CFX	9	March 19, 2021 06:46
Supersonic flow crashing in CFX Solver	Mfaizan	CFX	8	March 9, 2016 07:13
viewing cfx post while working on cfx solver manager	HMR	CFX	5	March 9, 2011 22:33
[ICEM] trouble with mesh quality from ICEM in CFX Solver	escher25	ANSYS Meshing & Geometry	0	February 28, 2011 07:38