SSH, Exceed, CFX

July 24, 2007, 19:43

Hi there !

I've recently gotten CFX11 installed on a RedHat Enterprise 4 and am accessing it throught SSH and Exceed (Hummingbird). I have no problem opening CFX and all...but, there is no display in the normal view window! Eg. when i open CFX-Pre or Post, I can see the Outline (Mesh, Simulation, Solver, etc) and status windows perfectly fine but not the view window which remained blank/grey. The solver works fine, can definitely see the solver window. Has anyone ever come across such a problem ? please help? I hope my question is clear. Thanks a bunch!

Zoe

July 24, 2007, 19:44

I almost forgot. When i use my workstation directly, the same problem happens. no display in the view section of CFX-Pre, Post.

July 24, 2007, 22:19

Try to use : ssh -X remote.ip.here

July 25, 2007, 04:56

That problem sounds familiar.

Make sure you are using Exceed3D (not just Exceed) version 10.

July 24, 2007, 19:43	SSH, Exceed, CFX	#1
Zoe Guest Posts: n/a	Hi there ! I've recently gotten CFX11 installed on a RedHat Enterprise 4 and am accessing it throught SSH and Exceed (Hummingbird). I have no problem opening CFX and all...but, there is no display in the normal view window! Eg. when i open CFX-Pre or Post, I can see the Outline (Mesh, Simulation, Solver, etc) and status windows perfectly fine but not the view window which remained blank/grey. The solver works fine, can definitely see the solver window. Has anyone ever come across such a problem ? please help? I hope my question is clear. Thanks a bunch! Zoe

July 24, 2007, 19:44	Re: SSH, Exceed, CFX	#2
Zoe Guest Posts: n/a	I almost forgot. When i use my workstation directly, the same problem happens. no display in the view section of CFX-Pre, Post.

July 24, 2007, 22:19	Re: SSH, Exceed, CFX	#3
Kiddo Guest Posts: n/a	Try to use : ssh -X remote.ip.here

July 25, 2007, 04:56	Re: SSH, Exceed, CFX	#4
michel Guest Posts: n/a	That problem sounds familiar. Make sure you are using Exceed3D (not just Exceed) version 10.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Proper way to name boundaries on 2D model for use in CFX?	RossFS	ANSYS Meshing & Geometry	4	November 10, 2011 03:38
Pros and Cons for CFX, CFdesign, COMSOL	Val	Main CFD Forum	3	June 10, 2011 03:20
CFX pressure in Simulations problem	nasdak	CFX	1	April 14, 2010 14:22
PhD using CFX	Rui	CFX	9	May 28, 2007 06:59
CFX 4.4 installation problem	Pandu Sattvika	CFX	1	December 1, 2001 05:07