CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

How to get together plotted results and solid part

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 20, 2007, 08:54
Default How to get together plotted results and solid part
  #1
Giuseppe
Guest
 
Posts: n/a
Hi there, my name is Giuseppe. I've performed a static simulation in CFX to study the flow rate through a simple tee-tube. The original solid part was in SolidWorks. I've imported it in DesignModeler and then I've created the fluid domain, I've defined the boundary conditions in CFX-Pre and ultimately I've run the Solver in CFX-Solver. The solver told me the simulation has completed normally. Right away I've plotted some results( temperature, pressure, velocity) in the fluid domain by means of streamlines, contours and vectors. This is my question: how could I see these results get together to my part since I've only the fluid domain defined in CFX. Is there a rule of thumb to view results in the solid original domain? Thanks in advance. Giuseppe
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
No results for solid domain Gary Holland CFX 10 March 13, 2009 04:30
Solid Surface and Fluid Results Plot CK FLOW-3D 2 November 12, 2008 01:32
How to join together CFX results and solid parts Giuseppe CFX 2 October 13, 2007 15:28
Can we add extra solid mesh part to the analsis? Farhath Alam FLUENT 0 December 22, 2006 03:41
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 11:14.