CFD Online Logo CFD Online URL
Home > Forums > CFX

importing mesh from spreadsheet

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 24, 2007, 04:57
Default importing mesh from spreadsheet
Virag Mishra
Posts: n/a
hi I have a .txt file with coordinates of the nodes and the element connectivity,I want to import the mesh to icem. Can any one tell how to do so. Import as formatted data point works fine for nodes but not if there is a known connectivity.
  Reply With Quote

Old   September 24, 2007, 18:28
Default Re: importing mesh from spreadsheet
Glenn Horrocks
Posts: n/a

I would write it in a simple format, probably Tecplot format is the easiest, and import it into ICEM that way. Of course you are going to have to do some research to find how Tecplot format works - Google can help here.

Glenn Horrocks
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit problems Althea FLUENT 22 January 4, 2017 04:19
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation tommymoose ANSYS Meshing & Geometry 48 April 15, 2013 04:24
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 04:52
Importing an OpenFOAM mesh into Engrid. Is there a mesh size limitation ? ayoros enGrid 0 April 20, 2011 09:53
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11

All times are GMT -4. The time now is 03:59.