|
[Sponsors] |
October 1, 2007, 02:24 |
related to ICEM-CFD and CFX
|
#1 |
Guest
Posts: n/a
|
Hi friends, I have few questions.
1. What is that ICEM stands for? 2. What is the main objective of keeping modeling options in ICEM-CFD when it is a meshing tool when so many high-end modeling softwares are available? 3. Is it possible to relate (combine) ICEM-CFD and CFX for optimization problem, so that meshing updates itself to suit the problem? Please give some relevant resources if you have. 4. I want to optimize the diameter size of a pipe at the outlet. Is it possible to combine a modeling software, ICEM-CFD and CFX so that optmization takes place only in one shot/run?? OR we have to make the changes in the geaometry, again mesh it and again run the solver?? PLZ reply... Thanks guys... |
|
October 1, 2007, 14:04 |
Re: related to ICEM-CFD and CFX
|
#2 |
Guest
Posts: n/a
|
2) Geometry option is for repair. Because even if you use high-end modeling packages you can steel get error after translation. In some cases more efficent is to made changes in ICEM. But I`m prefer make as much us possible in high-end modeling application.
|
|
October 3, 2007, 07:19 |
Re: related to ICEM-CFD and CFX
|
#3 |
Guest
Posts: n/a
|
wrt optimization, you can have a look at a CFX tutorial must be 22 or 23. It uses Design Xplorer,DM, CFX Mesh and CFX. For a simple problems it works well. Using a commercial driver, you can link CAD software, ICEM and CFX to automate n integrate processes, but again it depends on the complexity of the problem.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
definition of "node" / "element" in CFX and ICEM CFD | murx | CFX | 5 | January 18, 2017 04:24 |
Import Mesh from ICEM CFD to CFX | Andre Almeida | CFX | 16 | April 19, 2016 04:42 |
Icem Cfd To Cfx B.C. Problem | Kordou | CFX | 4 | July 17, 2008 13:49 |
related to ICEM - CFD and CFX | vvj | CFX | 0 | September 22, 2007 09:18 |
importing mesh from ICEM CFD into CFX 5 | Jay | CFX | 2 | November 12, 2002 14:46 |