CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

exporting node coordintes from icem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 6, 2007, 10:06
Default exporting node coordintes from icem
  #1
Virag Mishra
Guest
 
Posts: n/a
hi all

I have generated a mesh in ICEM, now I want to export the node coordinate infornation of each node to a file. How is that done ?
  Reply With Quote

Old   October 8, 2007, 09:19
Default Re: exporting node coordintes from icem
  #2
Elian81
Guest
 
Posts: n/a
The only way i know is that: open the gtm file using the post of cfx, and go to file export. From here you can create a file .csv with the coordinate of the points
  Reply With Quote

Old   October 8, 2007, 09:20
Default Re: exporting node coordintes from icem
  #3
Elian81
Guest
 
Posts: n/a
The only way i know is that: open the gtm file using the post of cfx, and go to file export. From here you can create a file .csv with the coordinate of the points.
  Reply With Quote

Old   October 8, 2007, 10:20
Default Re: exporting node coordintes from icem
  #4
Anantha
Guest
 
Posts: n/a
Hallo, One way which directly comes to my mind now is to write the mesh output in Star-CD format. It writes the cel data, vertex data,... You have the answer for your question in .vrt file written. It is the vertex data and contains all the nodal information. Here you don't need any solvers.

Regards Anantha
  Reply With Quote

Old   October 8, 2007, 12:45
Default Re: exporting node coordintes from icem
  #5
Virag Mishra
Guest
 
Posts: n/a
Hey thanks, Its saving a step one step from what I did ICEM->CFX PRE->CFX SOLVER->CFX POST.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Node Number vs. Node_ID & ICEM vs. CFX Araz ANSYS Meshing & Geometry 1 April 25, 2011 12:03
problem exporting from icem to fluent jc_muaddib FLUENT 1 June 16, 2010 05:16
[ICEM] Exporting Grid Volumes/Areas from ICEM to Calculate Discretization Error Josh ANSYS Meshing & Geometry 4 May 20, 2010 14:40
Problem exporting big meshes from ICEM to Fire Emil CFX 0 October 10, 2008 14:06
Exporting Meshes from ICEM to Fluent zi FLUENT 4 August 9, 2005 11:58


All times are GMT -4. The time now is 09:59.