CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Droplets at Walls

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 17, 2007, 01:28
Default Droplets at Walls
  #1
Elaine
Guest
 
Posts: n/a
Hi everyone,

I'm simulating a two phase flow (mixture of gas and liquid droplets) using Eulerian method. I want to ask how does CFX handles the droplet as it hits the wall? Does it bounce back to the main stream? If I want to have a wall deposition, can I do it without using algebraic slip model? I'm just new to CFX and any help is much appreciated!

Thanks guys! Elaine
  Reply With Quote

Old   October 18, 2007, 05:59
Default Re: Droplets at Walls
  #2
mic
Guest
 
Posts: n/a
Hi! Is your problem similar to the case of rain droplets in air? If yes, have you considered the use of the Lagrangian Particle Tracking (particle transport) instead of the Eulerian Model? To answer your question, when you set the boundary conditions on a wall in a multiphase analysis in CFX you can define a restitution coefficient (explained on help) that let you define the behaviour of the dispersed phase. You can also define a "wall deposition" if the dispersed phase "diapperars" from the analysis. Hope this helps!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Shadow walls in Fluent. ICEM meshes vs Workbench aarvay ANSYS Meshing & Geometry 11 January 12, 2017 13:51
Problem with rhoSimpleFoam : exploding enthalpy and density at the walls david39 OpenFOAM Running, Solving & CFD 6 January 18, 2011 12:49
Number of Droplets per Cell viv05 OpenFOAM 2 August 11, 2009 03:35
condensation of water vapour at room walls Felix FLUENT 0 September 14, 2007 12:03
thermal conditions of walls Stefan FLUENT 2 March 23, 2003 07:17


All times are GMT -4. The time now is 18:20.