CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   result file (https://www.cfd-online.com/Forums/cfx/24752-result-file.html)

Emre October 29, 2007 12:26

result file
 
Hi, I am having problem with the results file. Here is the thing, I am running my simulation on a UNIX system with commands without using a GUI. However, the simulation does NOT create a result file in each iteration whereas it was creating when i was running the simulation in my computer (on Windows) via GUI. While the options are same, why can't I get res files in each iteration? What do I need to do for this? Thnx for your concern.

Glenn Horrocks October 29, 2007 18:33

Re: result file
 
Hi,

This is set in the CCL. Check that you are defining writing a file every iteration in the CCL or in CFX-Pre.

Glenn Horrocks

Emre October 30, 2007 07:36

Re: result file
 
The simulation in UNIX only needs the .def file to start. The ccl file is created by itself after the simulation gets start. Thus, it seems I can only define writing a file in CFX-Pre. However, I do not know how to do this particularly in CFX-Pre. Also, it writes a .res file in after each iteration by itself when I run the simulation in Windows.

Glenn Horrocks October 30, 2007 19:03

Re: result file
 
Hi,

CFX operates the same way in Windows, Linux and UNIX. There is nothing special about the UNIX setup.

The CCL is contained in the def file. CFX-Pre writes the CCL depending on the options you choose. Check the output options in CFX-Pre and check you have set it to write the output file when you want them.

Glenn Horrocks


All times are GMT -4. The time now is 14:40.