CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

HOW TO EXPORT FROM ICEM TO ABAQUS

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 30, 2007, 09:58
Default HOW TO EXPORT FROM ICEM TO ABAQUS
  #1
Siva.K
Guest
 
Posts: n/a
Hi all, i ve a problem in exporting my mesh file from icem cfd to abaqus(*.inp) i am getting an error as "File D:/New Folder 1/imran1.par doesn't exist Please open ABAQUS params menu, set solver parameters and Press <Accept> button to create abaqus.par file." anybody has a soln for this problem? thanks in advance

Siva.K
  Reply With Quote

Old   October 30, 2007, 18:56
Default Re: HOW TO EXPORT FROM ICEM TO ABAQUS
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

I think ICEM needs an additional license option to write ABAQUS files. Do you have this license option?

Glenn Horrocks
  Reply With Quote

Old   October 31, 2007, 11:43
Default Re: HOW TO EXPORT FROM ICEM TO ABAQUS
  #3
myron
Guest
 
Posts: n/a
Select the solver - Abaqus. Then save the project. There should be a button for 'Parameters' - where you set element type, etc. You can also set BCs if desired, I think. Then try output.
  Reply With Quote

Old   November 3, 2007, 00:32
Default Re: HOW TO EXPORT FROM ICEM TO ABAQUS
  #4
Siva.K
Guest
 
Posts: n/a
Thanks Myron and Horrocks i got it through that abaqus solver option. and i ve tried applying the BC but i couldnt get those condn in Abaqus after importing. thanks a lot Siva.K
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ICEM export mesh Youen ANSYS Meshing & Geometry 34 April 23, 2017 13:15
[ICEM] Export unstructured periodic mesh from ICEM CFD to Fluent ivanddd ANSYS Meshing & Geometry 1 February 3, 2011 01:51
OpenFOAM on MinGW crosscompiler hosted on Linux allenzhao OpenFOAM Installation 127 January 30, 2009 20:08
How to Export ICEM mesh to ANSYS Structural SIVAPRAKAASH CFX 4 December 28, 2007 00:54
help, ICEM mesh export to ANSYS Fred CFX 3 June 28, 2007 14:51


All times are GMT -4. The time now is 17:51.