CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Adjust the parameter of the geometry

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 5, 2007, 11:09
Default Adjust the parameter of the geometry
  #1
Susan
Guest
 
Posts: n/a
Hi, everyone, in ICEM CFD, first I have made a cylinder, but later I want to adjust the height of the cylinder and add points to the base surfaces. Every time I have to redraw the geometry, and it is time-consuming. Whether is it possible that just adjusting the parameters of the original geometry? If it is, how?

Thanks a lot!

Susan
  Reply With Quote

Old   November 5, 2007, 18:07
Default Re: Adjust the parameter of the geometry
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

Parametric modelling is best done in Workbench.

Glenn Horrocks
  Reply With Quote

Old   November 9, 2007, 08:42
Default Re: Adjust the parameter of the geometry
  #3
Susan
Guest
 
Posts: n/a
Thank you for your reply. I havn't installed the workbench. So it seems that the parameters of geometry can't be adjusted in ICEM.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
Force can not converge colopolo CFX 13 October 4, 2011 23:03
[Gmsh] Problem meshing an imported geometry Alicia OpenFOAM Meshing & Mesh Conversion 0 March 30, 2010 05:53
Simulation of Flow through Complex 3D Geometry EmersonKB CFX 5 July 2, 2009 09:17
vitual _ real deneb FLUENT 3 January 22, 2007 05:31


All times are GMT -4. The time now is 11:06.