CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   Boundary Layer in CFX (https://www.cfd-online.com/Forums/cfx/24958-boundary-layer-cfx.html)

selim December 20, 2007 12:29

Boundary Layer in CFX
 
Dear all,

I have a steady and transient simulation with heat transfer. I would like to get the boundary layer in my simulation. How could I do that in both simulations? Velocity and thermal boundary layers

Thanks in advance

Glenn Horrocks December 20, 2007 17:56

Re: Boundary Layer in CFX
 
Hi,

This is easy to do in CFX-Post. Put a line item across the boundary layer and export the velocity, or create a chart from it. Easy.

Glenn Horrocks

Omer January 1, 2008 04:15

Re: Boundary Layer in CFX
 
If you mean you need to resolve boundary layer, then get your Y+ right for your mesh depending on your turbulent model.

If you mean from the post processing prespective do what Glenn says.



All times are GMT -4. The time now is 10:00.