|
[Sponsors] |
CFX's DES turb model hardcoded with kw SST??? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 6, 2008, 19:48 |
CFX's DES turb model hardcoded with kw SST???
|
#1 |
Guest
Posts: n/a
|
AFAIK CFX's DES model is hard coded with kw SST for the URANS turbulence modelling? Can anyone confirm this? Would it be possible to use the SA one equation model turb model for the URANS turbulence modelling portion instead???
Thanks. |
|
January 7, 2008, 18:17 |
Re: CFX's DES turb model hardcoded with kw SST???
|
#2 |
Guest
Posts: n/a
|
Hi,
Yes, I believe DES in CFX requires the SST model. If you want to do URANS then you can use any turbulence model (including one-equation models) as it is just a transient RANS model. Glenn Horrocks |
|
January 7, 2008, 21:01 |
Re: CFX's DES turb model hardcoded with kw SST???
|
#3 |
Guest
Posts: n/a
|
Thank you.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Near wall treatment in k-omega SST | Arnoldinho | OpenFOAM Running, Solving & CFD | 38 | March 8, 2017 14:48 |
Problem with DES model | mehul | Siemens | 0 | April 12, 2006 09:01 |
Problem with DES model | mehul | Phoenics | 0 | April 12, 2006 09:00 |
Problem with DES model | mehul | Fidelity CFD | 0 | April 12, 2006 09:00 |
SST model help please! | Sheila | Siemens | 2 | September 6, 2004 23:39 |