CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

doubt on creating a chart

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 8, 2008, 14:48
Default doubt on creating a chart
  #1
Rogério Fernandes Brito
Guest
 
Posts: n/a
How to create a chart like temperature [K] versus time [s] in a specified point of the solid domain? My simulation type is transient with 0.1 [s] as the timestep, with 100 [s] of total time (not CPU time).

I´m using Ansys CFX-v11.0 and CFX-v5.6 too.
  Reply With Quote

Old   January 8, 2008, 17:11
Default Re: doubt on creating a chart
  #2
hiesus
Guest
 
Posts: n/a
Hi!

This sequence work for me:

1.You have to create a point in the specific location to study. 2.Under "Chart" tab (details vew, left-down window), select type>time. 3.In the same window Select the "Chart Line 1" tab, method>Point. 4.(same window) Select Location>"your point name". 5.(same window) Select (Time Variable)Varible>Temperature (or any other variable of your interest depending on time) 6.Finally click apply and if necessary click "refresh" over the chart viewer.

I hope this could help you.

By.
  Reply With Quote

Old   January 8, 2008, 18:19
Default Re: doubt on creating a chart
  #3
Rogerio Fernandes Brito
Guest
 
Posts: n/a
Thank you very much! It did work out! Gracias!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] Fluent3DMeshToFoam simvun OpenFOAM Meshing & Mesh Conversion 50 January 19, 2020 16:33
Problem in running ICEM grid in Openfoam Tarak OpenFOAM 6 September 9, 2011 18:51
Creating a Velocity Chart S.Beta CFX 1 January 29, 2010 14:43
Creating chart in cfx-post Az CFX 1 October 22, 2008 08:06
Problems with Meshing: Collapsed Cells Emmanuel Resch Siemens 1 July 30, 2007 04:02


All times are GMT -4. The time now is 00:44.