CFD Online Logo CFD Online URL
Home > Forums > CFX

Particles in a Hydrocyclone using CEL

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 14, 2008, 11:00
Default Particles in a Hydrocyclone using CEL
Posts: n/a
Hello Folks,

Im working in a hydrocyclone and I would like to know how could I build a histogram of particle sizes(or mass) at underflow and overflow using CEL.

My model is steady state, lagragian multiphase model(Tracking Particles), SSG turbulent model, Buoyancy, normal particle size distribution at inlet.

Best Regards,

  Reply With Quote

Old   January 16, 2008, 19:23
Default Re: Particles in a Hydrocyclone using CEL
Posts: n/a
Hey Vallejo,

I was working with hydrocyclone (single phase flow) once and found it really difficult to match the predicted velocity profile with that from experiments (I am talking about a nice agreement). Especially in lower region of conical part. I used SSG-RSM turbulence model with transient solver.

I am wondering if we can share our experiences and learn. Are you able to get nice velocity profile aggrement using SSG model? Did you try LES? And what meshing software are you using?

Positively looking forward for your reply,

Regards, Joe

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Particles are not hitting the wall CedricVH OpenFOAM Bugs 23 May 19, 2016 20:29
trying to simulate two-phase jet flow with particles in surface injection ajkratos FLUENT 5 March 3, 2015 22:33
Particles do not hit the wall CedricVH OpenFOAM 0 April 15, 2010 08:21
particles model ati_ros61 FLOW-3D 3 December 6, 2009 17:03
how to determine the number of particles injected. welch FLUENT 1 November 1, 2005 06:11

All times are GMT -4. The time now is 05:45.