CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Problem with Output to .cfx5 mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 23, 2008, 14:46
Default Problem with Output to .cfx5 mesh
  #1
Ben
Guest
 
Posts: n/a
I have generated a mesh using ICEM, and I had check the volume mesh as well as the surface mesh on the domain. It looks fine , and just like what I would expected. Then, I use the Output option to write the solver file into .cfx5 mesh file. However, when I open and import the mesh into CFX-Pre, the mesh show some irregularities on some surfaces, i.e. some triangle weird shape like mesh. But, then I examine the mesh again in ICEM, it is pecfectly fine in there, but in CFX-Pre is different. I am just wondering what could possibly be the problem, or what could possibly be the cause of that?

Thanks
  Reply With Quote

Old   January 23, 2008, 16:44
Default Re: Problem with Output to .cfx5 mesh
  #2
Usman
Guest
 
Posts: n/a
Did you smooth your mesh in ICEM? You have to make there are no unconnected vertices.

Usman
  Reply With Quote

Old   January 23, 2008, 17:12
Default Re: Problem with Output to .cfx5 mesh
  #3
Ben
Guest
 
Posts: n/a
yes, i had done the smooth mesh globally, the process was completed without any errors. However, when i tried to do smooth hexahedral mesh - orthogonal, there is an error "segmentation violation - exiting after doing an emergency save", so i was not able to do the smooth hexahedral mesh. Then, i tried to repair the mesh with "build mesh topology", and then tried the smooth hexahedral mesh again. However, still get the same error messege, and the program exits. So, the problem will be with my current mesh, or i forget something while doing the mesh?

thanks
  Reply With Quote

Old   January 24, 2008, 17:35
Default Re: Problem with Output to .cfx5 mesh
  #4
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

Check the elements on the boundary conditions are correctly sorted into parts. ICEM sometimes mixes them up.

Glenn Horrocks
  Reply With Quote

Old   January 24, 2008, 18:47
Default CFX post 10
  #5
sherkhan
Guest
 
Posts: n/a
I have problem that i can not get the concentration of aditional variable at the outlet. Can somebody helpme
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
[snappyHexMesh] external flow with snappyHexMesh chelvistero OpenFOAM Meshing & Mesh Conversion 11 January 15, 2010 20:43
How to control Minximum mesh space? hung FLUENT 7 April 18, 2005 10:38
mesh control problem TUM CFX 4 July 27, 2001 17:17
Mesh Mignard FLUENT 2 March 22, 2000 06:12


All times are GMT -4. The time now is 13:52.