CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

problem on volume mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 29, 2008, 03:41
Default problem on volume mesh
  #1
wan
Guest
 
Posts: n/a
HI,

im using workbench mesh tool doing surface meshing on micro channel but error happen when i genarate volume meshing. Setting in body spacing was 1. Anybody can give any tips on this?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] engineFoam new mesh problem ayhan515 OpenFOAM Meshing & Mesh Conversion 5 August 10, 2015 09:45
Anyone using GID mesher? problem with .igs file and volume mesh afo3 Main CFD Forum 1 November 24, 2010 14:31
Ansys 12 Workbench problem when generating volume mesh Sveink ANSYS 5 January 6, 2010 04:17
Volume mesh problem in STARDESIGN Jaedal Siemens 2 October 17, 2007 10:23
Help! i need help Mesh volume problem Sergi CFX 1 February 1, 2006 17:29


All times are GMT -4. The time now is 17:51.