CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Surface reaction source definition.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 17, 2008, 06:36
Default Surface reaction source definition.
  #1
windhair
Guest
 
Posts: n/a
There is a porous wall in my simulation of surface reaction, with such reaction A + B = C + D, A, B and C are always in the flow domain, but D will penetrate through reaction wall to the outside, this cause the lose of total mass in the flow domain. Under such situation, how to define the boundary source, shall I define only the mass source for each components or the source for the continuity equation is also necessary?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
wmake compiling new solver mksca OpenFOAM Programming & Development 14 June 22, 2018 07:29
Version 15 on Mac OS X gschaider OpenFOAM Installation 113 December 2, 2009 11:23
Surface Reaction Model or Heterogeneous Rxn Model? satheeskannan FLUENT 0 September 2, 2008 19:55
species source term reaction Andrew FLUENT 3 May 27, 2005 13:35
Plotting Surface Reaction Rate Ryan FLUENT 0 February 12, 2003 15:47


All times are GMT -4. The time now is 07:43.