CFD Online Logo CFD Online URL
Home > Forums > CFX

Bad mesh at the edges

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 13, 2008, 11:04
Default Bad mesh at the edges
Posts: n/a
Hi guys... I have a problem with an STL file. I am using ICEM to create the mesh on a model of aneurysm from an STL file. But the problem is that, even if I create a line at the intersection between the inlet surface and the aneurysm wall the mesh can not cover all the inlet surface... It' difficult to explain...if somebody can help I can also send an email with images... Let me know... Thanks guys

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
SnappyHexMesh for internal Flow vishwa OpenFOAM Native Meshers: snappyHexMesh and Others 24 June 27, 2016 08:54
Converting Starccm+ mesh Ladnam OpenFOAM 0 September 14, 2011 06:30
engrid -> save as .stl with boundarie codes Zymon enGrid 31 August 29, 2011 13:40
ICEM clustering of mesh points and multiple edges webhaw CFX 4 July 25, 2007 16:29
basic of mesh refinement arya CFX 4 June 19, 2007 12:21

All times are GMT -4. The time now is 06:47.